Startseite
Bild
Bild
  • sofort einsetzbarer und komfortabler ZFS Storage-Server für iSCSI/FC, NFS und SMB
  • Active Directory Support mit Snaps als Vorherige Version
  • mit einer komfortablen Web-GUI
  • alle Funktionen für ein fortschrittliches NAS oder SAN
  • kommerzielle Nutzung erlaubt
  • kein Speicherlimit
  • freier Download für End-User

Community add-ons wie z.B.AFP, AMP, Baikal, Proftp, Mediatomb, Owncloud, PHPVirtualbox, Pydio oder Serviio.


Bild
  • schnellere GUI durch Background Dienste
  • Support/ Updates auf neueste Versionen oder Fehlerbehebungen
  • Extensions wie komfortables ACL Management, Disk und Echtzeitmonitoring oder Remote Replikation
  • Appliance Diskmap, Security und Tuning (Pro complete)
  • Redistribution/Bundling/ Installation im Kundenauftrag optional
Fordern Sie ein Angebot an.
Details: Featuresheet.pdf

Monitor extension (Solarish only)

  •  Realtime monitoring of important system parameters via websocket (status lights)
  •  Shortterm monitoring (last 60s) of cpu%, w%, b% and iops/s of reads, writes and waits
  •  Realtime Update of pages (2 Min after last access)
  •  Disk Location of LSI SAS2 slots (ZFS WWN disk-id to physical slot mapping)
  •  Editing features (menus, actions and translations)
  •  Logs and hashed with internal infos and return values of napp-it commands on a page load
  •  Health-Status for multiple napp-it appliances (with status lights) via netscan or on appliance groups
  •  Vnic, Vlan and Link-Aggregation settings
  •  Disk, SAS2 Bays and Smartvalues are discovered in the background and buffered > 1h to increase GUI performance
  • Bridge Management in Menu System > Network Eth (2016.05dev up): Use OmniOS like a 1/10 G switch


 How to setup

  • You need a licence key on every server (you can request evaluation keys)
  • Register the key: copy/paste the whole key-line into menu extension-register, example:
    monitor h:server2 - 20.06.2012::VcqmhqsmVsdcnetqsmVsTTDVsK
  • Check if monitoring is enabled. You can enable/disable in the uper right toplevel menu nearby logout
    Optionally update napp-it to the newest Pro release (Menu About > Update)


Screenshots

SAS2 Slot monitorand sas targets numbers (you need target number to identify disks from system error logs):
sas2_slots


Shortterm-monitor (after starting a scrub)

shortterm




napp-it 31.03.2017