Falls Sie napp-it einsetzen, so unterstützen Sie bitte die weitere Entwicklung des kostenlosen napp-it ZFS-Servers.
Bitte Hostname angeben oder per email mitteilen! Aufgrund des Kleinunternehmerstatus gem. § 19 UStG erheben wir keine Umsatzsteuer und weisen diese daher auch nicht aus..
Details oder Infos zu Werbung an dieser Stelle...
Bitte Hostname angeben oder per email mitteilen! Aufgrund des Kleinunternehmerstatus gem. § 19 UStG erheben wir keine Umsatzsteuer und weisen diese daher auch nicht aus..
Details oder Infos zu Werbung an dieser Stelle...
alle Angaben sind Empfehlungen ohne Gewähr
Controller
Vermeiden Sie die teuren Hardware-Raid Controller oder Sie
verlieren viele ZFS-Features, Benutzen sie lieber die "billigen"
JBOD (Just a bunch of disk) Controller.
Investieren Sie besser in CPU-Power und vor allem in (bevorzugt ECC) RAM
Mainboard Sata
use AHCI-Mode (Hotplug)
Mainboard with ICH10 Chipset (max 6x SATA
SAS-I/Sata Controller (no longer suggested, max 2 TB disks)
LSI 1068E Chipset /3 Gbit: (Intel, LSI,SuperMicro..)
z.B:
Intel SASUC8I see http://www.intel.com/products/server/raid-controllers/SASUC8I/SASUC8I-overview.htm
SuperMicro AOC-USASLP-L8i, 8 Channel intern, IT-Mode Firmware, ca 120 Euro, ("links" bestücktes UIO-Modell !!!)
or LSI Models see also http://www.servethehome.com/intel-sasuc8i-lsi-lsi-sas3081er-lsi-1068e-based-raid-controller-review/
RAID Modes of USALP8i (see forums.overclockers.com)
There are three RAID modes that are supported by the AOC-USAS-L8i Add-on Card:
SAS-2/Sata 6G Controller (Disk > 2 TB, use them with expanders)
am Besten geeignet sind HBA mit LSI 2008 chipset in IT mode
http://www.lsi.com/products/storagecomponents/Pages/HBAs.aspx
LSI 9211-8i
SuperMicro AOC-USAS2-L8e (wrong side mounted)
• IT Mode (Initiator and Target Mode): This is the default mode for the AOC-USAS-L8i Add-on Card. The maximum support for this (only jbod => this is best for zfs, use it!!) If nor set, This mode requires an IT mode firmware flash to the BIOS and an IT mode driver installation to the OS. (download firmware from supermicro)
see also: http://www.servethehome.com/flashing-intel-sasuc8i-lsi-firmware-guide/
• IR Mode (Integrated RAID Mode): In Integrated Raid™ mode the integrated ARM chip on the AOC-USAS-L8i Add-on Card creates Integrated Mirroring™ (IM, RAID 1), Integrated Mirroring Enhanced (IME, RAID 1E) and Integrated Striping (IS, RAID 0) through the chipset"s BIOS and the system"s OS. The maximum support for this IR mode is up to 63 hard disk drives under an expander topology.
do not use with zfs!
• SR (Software RAID): In this mode you must buy the I-Button feature from SuperMicro to enable RAID level 5 use. First you must create RAID level 0, 1, 5 or 10 from the MegaRAID BIOS Configuration Utility in order for the OS to see the hard disk drives (this can be done via MSM too, so necessary need to be done in MegaRAID Configuration Utility). The maximum support for this RAID mode is up to eight (8) hard disk drives under expander topology.
This RAID mode requires an SR mode firmware flash to the BIOS and an SR mode driver installation to the OS. This mode also requires that the SWR5 jumper on the AOC-USAS-L8i Add-on Card is enabled (see Section 2-2: "Front Jumper Locations and Pin Definitions" on page 2-3 for details).
NOTE: MegaRAID Storage Manager (MSM) software version 2.60 or later supports both SR and IR Mode in both Windows and Linux. MSM does not support IT Mode since IT is only an initiator and target mode, and therefore it does not required storage management utility.
do not use with zfs!
PCI-X/ SATA Controller (obsolet)
SuperMicro AOC-SAT2-MV8 8 x SATA
Ethernet Controller
1Gb: Intel
10Gb: CX4 mit Intel Chipsatz 82598EB (z.B. von SuperMicro ca 380 Euro)
mit 10Gb Switch z.B. HP Procurve 2910
Controller
Vermeiden Sie die teuren Hardware-Raid Controller oder Sie
verlieren viele ZFS-Features, Benutzen sie lieber die "billigen"
JBOD (Just a bunch of disk) Controller.
Investieren Sie besser in CPU-Power und vor allem in (bevorzugt ECC) RAM
Mainboard Sata
use AHCI-Mode (Hotplug)
Mainboard with ICH10 Chipset (max 6x SATA
SAS-I/Sata Controller (no longer suggested, max 2 TB disks)
LSI 1068E Chipset /3 Gbit: (Intel, LSI,SuperMicro..)
z.B:
Intel SASUC8I see http://www.intel.com/products/server/raid-controllers/SASUC8I/SASUC8I-overview.htm
SuperMicro AOC-USASLP-L8i, 8 Channel intern, IT-Mode Firmware, ca 120 Euro, ("links" bestücktes UIO-Modell !!!)
or LSI Models see also http://www.servethehome.com/intel-sasuc8i-lsi-lsi-sas3081er-lsi-1068e-based-raid-controller-review/
RAID Modes of USALP8i (see forums.overclockers.com)
There are three RAID modes that are supported by the AOC-USAS-L8i Add-on Card:
SAS-2/Sata 6G Controller (Disk > 2 TB, use them with expanders)
am Besten geeignet sind HBA mit LSI 2008 chipset in IT mode
http://www.lsi.com/products/storagecomponents/Pages/HBAs.aspx
LSI 9211-8i
SuperMicro AOC-USAS2-L8e (wrong side mounted)
• IT Mode (Initiator and Target Mode): This is the default mode for the AOC-USAS-L8i Add-on Card. The maximum support for this (only jbod => this is best for zfs, use it!!) If nor set, This mode requires an IT mode firmware flash to the BIOS and an IT mode driver installation to the OS. (download firmware from supermicro)
see also: http://www.servethehome.com/flashing-intel-sasuc8i-lsi-firmware-guide/
• IR Mode (Integrated RAID Mode): In Integrated Raid™ mode the integrated ARM chip on the AOC-USAS-L8i Add-on Card creates Integrated Mirroring™ (IM, RAID 1), Integrated Mirroring Enhanced (IME, RAID 1E) and Integrated Striping (IS, RAID 0) through the chipset"s BIOS and the system"s OS. The maximum support for this IR mode is up to 63 hard disk drives under an expander topology.
do not use with zfs!
• SR (Software RAID): In this mode you must buy the I-Button feature from SuperMicro to enable RAID level 5 use. First you must create RAID level 0, 1, 5 or 10 from the MegaRAID BIOS Configuration Utility in order for the OS to see the hard disk drives (this can be done via MSM too, so necessary need to be done in MegaRAID Configuration Utility). The maximum support for this RAID mode is up to eight (8) hard disk drives under expander topology.
This RAID mode requires an SR mode firmware flash to the BIOS and an SR mode driver installation to the OS. This mode also requires that the SWR5 jumper on the AOC-USAS-L8i Add-on Card is enabled (see Section 2-2: "Front Jumper Locations and Pin Definitions" on page 2-3 for details).
NOTE: MegaRAID Storage Manager (MSM) software version 2.60 or later supports both SR and IR Mode in both Windows and Linux. MSM does not support IT Mode since IT is only an initiator and target mode, and therefore it does not required storage management utility.
do not use with zfs!
PCI-X/ SATA Controller (obsolet)
SuperMicro AOC-SAT2-MV8 8 x SATA
Ethernet Controller
1Gb: Intel
10Gb: CX4 mit Intel Chipsatz 82598EB (z.B. von SuperMicro ca 380 Euro)
mit 10Gb Switch z.B. HP Procurve 2910
napp-it 01.02.2012